Why M-seal?
Learn MoreAssociated Products
M-Seal Phataphat Epoxy Putty
Feature & Benefits
Applications
Precautions
Chemical Specs
- Sets in 25 – 30 minutes
- Creates a tough, long-lasting bond
- Offers excellent electrical insulation
- Resistant to moisture, water, heat, mild acids, and alkali
- Offers a smooth finish
- Allows drilling, filing, cutting, and painting, on hardening
- Clean oil, grease and dirt from the surfaces.
- Abrade the surface with sandpaper.
- If you have greased the surface, degrease it using acetone
- Mix the resin and hardener in equal volumes, and knead until you obtain a uniform color
- Apply the mixture immediately after mixing is complete
- Trim your nails before mixing
- You may use hand gloves to protect your skin
- Do not add any other solvent to the mixture
- After mixing, do not hold the mixture in your hand
- Wash your hands with soap and water immediately after application
- Wait an hour after application for the mixture to harden completely.
| Working Life | 10 minutes approximately for 100g mix at 30° C |
| Setting Time | 25 minutes approximately for 30g mix at 30° C |
| Water Absorption | <0.5 percent |
M-Seal GP Epoxy Compound Epoxy Putty
Feature & Benefits
Applications
Precautions
Chemical Specs
- Easy to use
- Creates a tough, long-lasting bond
- Offers excellent electrical insulation
- Resistant to moisture, water, heat, mild acids, and alkali
- Offers a smooth finish
- Allows machining, drilling, tapping, and cutting, once hardened
- Clean oil, grease and dirt from the surfaces.
- Abrade the surface with sandpaper
- If you have greased the surface, degrease it using acetone
- Mix the resin and hardener in equal volumes, and knead until you obtain a uniform color
- Apply the mixture immediately after mixing is complete
- Smoothen with a damp cloth within 20 minutes.
- Trim your nails before mixing
- You may use hand gloves to protect your skin
- Do not add any other solvent to the mixture
- After mixing, do not hold the mixture in your hand
- Wash your hands with soap and water immediately after application
- Wait one to two hours after application for the mixture to harden completely
| Processing Time | 15 minutes approximately for 50g mix at 30° C |
| Setting Time | 60 minutes approximately for 30g mix by Shore-A at 30° C |
| Water Absorption after 24 hrs curing at 30° C | <0.5 percent |
| Working Temperature Limit | 80° C |
M-Seal Sanitary White Epoxy Putty
Feature & Benefits
Applications
Precautions
Chemical Specs
- Soft and pliable
- Easy to use
- Safe on hands
- Creates a tough, long-lasting bond
- Offers excellent electrical insulation
- Resistant to moisture, water, heat, fungus, mild acids, and alkali
- Offers a smooth finish
- Allows tapping, cutting, and painting, once hardened
- Remains crack-free after hardening and ageing
- Clean the impaired surface
- Mix the resin and hardener in equal volumes, and knead until you obtain a uniform color
- Apply the mixture immediately after mixing is complete
- Smoothen it with wet cloth within 20 minutes
- You may use hand gloves to protect your skin
- Do not add any other solvent to the mixture
- Wash your hands with a soap and water, or a cleansing cream immediately after application
- Wait one to two hours after application for the mixture to harden completely
| Processing Time | 15 minutes approximately for 50g mix at 30° C |
| Setting Time | 60 minutes approximately for 30g mix at 30° C |
| Water Absorption after 24 hrs curing at 30° C | <0.5 percent |
M-Seal PTFE Thread Seal Tape
Feature & Benefits
Applications
Precautions
Chemical Specs
- Excellent resistance against temperature, chemical pressure, and most solvents
- Uniform thickness prevents breakage
- Higher thickness ensures less consumption, facilitating cost-saving
- Ideal for hot and cold water, heated gases, and high-pressure equipment
- Better gap filling
- Clean, dry, and smoothen the surface that is to be taped
- Wrap the tape using normal tension such that the tape takes the form of the thread
- Wrap tape in a helical movement, clockwise in the direction of the thread.
- Avoid using excess tension while wrapping
- Keep away from flame
| Specifications | White | Yellow |
| Width (in millimeters) | 12± 1 | 12 ± 1 |
| Available Lengths (in meters) | 5, 10, and 12 | 5, 10, and 12 |
| Thickness (in microns) | 80 | 80 |
| Density (in gm/meter) | 0.35 | 0.45 |
M-Seal Super Epoxy Putty
Feature & Benefits
Applications
Precautions
Chemical Specs
- Quick setting time
- Creates a strong, long-lasting bond
- Offers excellent electrical insulation
- Resistant to moisture, water, heat, mild acids, and alkali
- Offers a smooth finish
- Allows filing, cutting, and drilling once hardened
- Clean and abrade the impaired surface
- Mix the resin and hardener in equal volumes, and knead until you obtain a uniform color
- Apply the mixture immediately after mixing is complete
- Trim fingernails before use
- You may use barrier cream to protect your skin
- Do not add any other solvent to the mixture
- Do not hold the mixture in hand once the mixing is complete
- Wash your hands with soap and water immediately after application
- Do not use organic solvents for cleaning hands
- Pack the remaining M-Seal Super well
| Working Life | 10 minutes approximately for 100g mix at 30° C |
| Setting Time | 25 minutes approximately for 30g mix at 30° C |
| Tensile Strength | >200kg/cm2 |
| Water Absorption | <0.5 percent |
-
About Us
Learn more -
How to use product
Watch Videos